View E3F2-R2Z1_1111780.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

R
M18 Cylindrical Photoelectric
Threaded Cylindrical M18 Size Sensors with Built-in Amplifier H Rugged stainless and nickel plated
brass versions
E3F2
H H H H H
Chemical resistant, ABS resin case type Polarized models Compact and space-saving Long detection distance (7 m) DC switching types with connectors for easy maintenance (10 to 30 VDC, or 24 to 240 VAC)
H Wide operating voltage range H Short-circuit and reverse connection
protection (DC switching type)
H UL, CSA listed and CE marked
Ordering Information
J SENSORS
Supply AC Type Through-beam g Retroreflective, , Non-polarized N lid Diffuse DC Through-beam g Connector Connection Pre-leaded Output Light-On Dark-On Light-On Dark-On Light-On Dark-On NPN 7m 100 mm 2m Range 3m Housing Plastic Plastic Plastic Plastic Plastic Plastic Plastic NPB SS PNP Plastic NPB SS Diffuse NPN 10 cm NPB SS Plastic 30 cm Note: NPB = Nickel plated brass; SS = Stainless steel
(This table continues on the next page.)
Part number E3F2-3Z1 E3F2-3Z2 E3F2-R2Z1 E3F2-R2Z2 E3F2-DS10Z1N E3F2-DS10Z2N E3F2-7C4-P1 E3F2-7C4-M1-C E3F2-7C4-M1-S E3F2-7B4-P1 E3F2-7B4-M1-C E3F2-7B4-M1-S E3F2-DS10C4-M1-C E3F2-DS10C4-M1-S E3F2-DS10C4-P1 E3F2-DS30C4-P1
Plastic
E3F2
Ordering Information Table - continued from previous page
Supply DC Type Diffuse Connection Connector Output PNP Range 10 cm Housing NPB SS Plastic 30 cm Retroreflective, , Non-polarized N lid Retroreflective, , Polarized Pl i d NPN PNP NPN PNP Through-beam g Pre-leaded NPN 7m 2m Plastic Plastic Plastic NPB SS NPB SS Plastic NPB SS PNP 7m Plastic NPB SS Diffuse NPN 10 cm NPB Plastic SS 30 cm PNP 10 cm Plastic NPB Plastic SS 30 cm Retroreflective, , Non-polarized N lid Retroreflective, , Polarized Pl i d NPN PNP NPN PNP 2m 2m Plastic Plastic Plastic NPB SS NPB SS Note: NPB = Nickel plated brass; SS = Stainless steel Part number
E3F2
E3F2-DS10B4-M1-C E3F2-DS10B4-M1-S E3F2-DS10B4-P1 E3F2-DS30B4-P1 E3F2-R2C4-P1 E3F2-R2B4-P1 E3F2-R2RC4-M1-C E3F2-R2RC4-M1-S E3F2-R2RB4-M1-C E3F2-R2RB4-M1-S E3F2-7C4 E3F2-7C4-C E3F2-7C4-S E3F2-7B4 E3F2-7B4-C E3F2-7B4-S E3F2-DS10C4-C E3F2-DS10C4-N E3F2-DS10C4-S E3F2-DS30C4 E3F2-DS10B4-C E3F2-DS10B4-N E3F2-DS10B4-S E3F2-DS30B4 E3F2-R2C4 E3F2-R2B4 E3F2-R2RC4-C E3F2-R2RC4-S E3F2-R2RB4-C E3F2-R2RB4-S
J ACCESSORIES (ORDER SEPARATELY)
Description Sensor mounting bracket Lens protector kit (glass plate, two gaskets and metal retainer) Small corner cube reflector (38 H x 20 W x 11 D mm) Adhesive backed reflector tape (10 H x 35 W x 0.7 D mm) Adhesive backed reflector tape (35 H x 40 W x 0.7 D mm) Mounting bracket for E39-R1 reflector Right angle adapter for through-beam and retroreflective E3F2 sensors Part number Y92E-B18 E39-F31 E39-R3 E39-RSA E39-RSB E39-L7 E39-RU1
J CONNECTOR CORDSETS
Connector type 4-wire DC Micro Ch Mi ChangeR R connector Robotic cable with M12 connector t Cable size 22 AWG Length 2 m (6.56 ft) 5 m (16.40 ft) 10 m (32.8 ft) 2 m (6.56 ft) 5 m (16.40 ft) Straight connector Y96E-44SD2 Y96E-44SD5 Y96E-44SD10 XS2F-D421-D80-R XS2F-D421-G80-R Right angle connector Y96E-44RD2 Y96E-44RD5 Y96E-44RD10 XS2F-D422-D80-R XS2F-D422-G80-R
2
E3F2
J REPLACEMENT PARTS
Description Reflector for E3F2-R2j4 retroreflective sensors Two plastic M18 mounting nuts Part number E39-R1 E3F-PHWS
E3F2
Specifications
J DC SWITCHING MODELS
Part number Method of detection Sensing range Standard target E3F2-7C4-j, E3F2-7B4-j Through-beam g 7 m (22.96 ft) 11 x 11 mm E3F2-R2C4-j, E3F2-R2B4-j Retroreflective Non-polarized 2 m (6.56 ft) 56 x 56 mm Polarized 2 m (6.56 ft) 10 cm (3.94 in) 5 x 5 cm 90% Kodak White Card 30 cm (11.81 in) 10 x 10 cm 90% Kodak White Card E3F2-R2RC4-j, E3F2-R2RB4-j E3F2-DS10C4-j, E3F2-DS30C4-j, E3F2-DS10B4-j E3F2-DS30B4-j Diffuse
Supply voltage Output Current consumption Response time Stabilization on Powerup Ambient temperature Ambient light immunity Relative humidity y Insulation resistance Dielectric strength Vibration Shock Enclosure Light source Indicators Sensitivity adjustment Operation mode Weight g Circuit protection Materials Lens Housing Metal Plastic Operating Storage Operating Storage
10-30 VDC 10% maximum permissible ripple, peak-to-peak NPN or PNP open collector, 100 mA, residual voltage 2 V max. at 100 mA 45 mA max. 2.5 ms max. 50 ms -25C to 55C (-13F to 131F) with no icing -30C to 70C (-22F to 158F) Incandescent: 3,000 x; Sunlight: 10,000 x 35% to 85% RH, no condensation 35% to 95% RH 20 M at 500 VDC 1,000 VAC, 50/60 Hz for 1 min. between current carrying parts and case 10 to 55 Hz 1.5 mm double amplitude 1 hr each in X, Y, Z axes 500 m/s2 (approx. 50 G) IP67, NEMA 6 for metal versions; IP66 NEMA, 4 for plastic versions Infrared LED Power and light received LEDs Fixed Light-ON or Dark-ON selectable with control wire Pre-leaded 100 g; connector: 60 g Pre-leaded 85 g; connector: 40 g Output short-circuit and reverse polarity Plastic Plastic (ABS), nickel plated brass, stainless steel PVC Plastic Nickel plated brass, stainless steel Plastic (ABS), nickel plated brass, stainless steel Adjustable Red LED Infrared LED 25 mA max.
Cable sheath
3
E3F2
J AC MODELS
Part number Method of detection Sensing range Standard target Supply voltage Output Power consumption Response time Stabilization on Powerup Ambient temperature Ambient light immunity Relative humidity y Insulation resistance Dielectric strength Vibration Shock Enclosure Light source Indicators Sensitivity adjustment Operation mode Weight g Circuit protection Materials Lens Housing Cable sheath Connector models Operating Storage Operating Storage E3F2-3Z1, E3F2-3Z2 Through-beam 3 m (9.84 ft) 11 mm E3F2-R2Z1, E3F2-R2Z2 Retroreflective 2 m (6.56 ft) 56 mm
E3F2
E3F2-DS10Z1N, E3F2-DS10Z2N Diffuse 10 cm (3.94 in) 10 x 10 cm 90% Kodak white card
24-240 VAC 10%, 50/60 Hz SCR 200 mA max.; residual voltage 5 V max. at 200 mA 10 mA max. 30 ms max. 100 ms -25C to 55C (-13F to 131F) with no icing -30C to 70C (-22F to 158F) Incandescent: 3,000 x; sunlight: 10,000 x 35% to 85% RH, no condensation 35% to 95% RH 20 M at 500 VDC between current carrying parts and case 1,500 VAC, 50/60 Hz for 1 min. between current carrying parts and case 10 to 55 Hz 1.5 mm double amplitude 2 hrs each in X, Y, Z axes 500 m/s2 (approx. 50 G) IP66, NEMA 1, 2, 4 (indoor) Infrared LED Power and light received LEDs Fixed Light-ON (Z1 models) or Dark-ON (Z2 models) Pre-leaded models 110 g 55 g -- Acrylate resin Plastic ABS PVC 5 mA max.
4
E3F2
E3F2
Engineering Data
J OPERATING RANGE (TYPICAL)
E3F2-3jj-jj (Through-beam) E3F2-R2jj-jj (Retroreflective)
Operating position Y (cm)
X
Operating position Y (cm)
Y
Y X
Distance X (m)
Distance X (m)
E3F2-3 and E39-RU1 (Right angle adapter)
150 100 50 0 0 -50 -100 -150 05 1 15 2 25 3 35 4 45
E3F2-R2 and E39-RU1 (Right angle adapter)
80 60 40 20 0 -20 -40 -60 -80 0 05 1 15 2 25 3
Distance X (m) E3F2-7j-4j (Through-beam)
40
Distance X (m)
E3F2-R2Rj-4j (Polarized, retroreflective)
10 8
Operating position Y (cm)
30
Operating position Y (cm)
20 10 0 0 -10 -20 -30 1 2 3 4 5 6 7 8 9
6 4 2 0 0,0 -2 -4 -6 -8 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
-40
Distance X (m)
-10
Distance X (m)
5
E3F2
E3F2
E3F2-DS10j4-N E3F2-DS10j4-P1
15 White paper (5 x 5 cm)
E3F2-DS30jj-jj (Diffuse)
Operating position Y (mm)
Y 10 X 5 0 -5 -10 -15
Y
Operating position Y (cm)
X
White paper (10 x 10 cm)
0
20
40
60
80
100
120
Distance X (mm)
Distance X (cm)
J EXCESS GAIN VS. SET DISTANCE (TYPICAL)
E3F2-3jj-jj (Through-beam)
DC type DC type
E3F2-R2jj-jj (Retroflective, Non-polarized)
Excess gain ratio
Excess gain ratio
AC type
AC type
Distance (m) E3F2-3 and E39-RU1 (Right angle adapter)
50.0 45.0 DC Type 40.0 35.0 30.0 25.0 20.0 15.0 10.0 5.0 1.0 0.0 AC Type
Distance (m) E3F2-R2 and E39-RU1 (Right angle adapter)
20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 1.0 0.0 0 AC Type DC Type
0
1
2
3
4
5
6
7
0.5
1
1.5
2
2.5
3
3.5
Distance (m)
Distance (m)
6
E3F2
E3F2
E3F2-7j4-j (Through beam)
E3F2-R2Rj4-j (Polarized retroreflective)
100
Excess gain ratio
10
1
0,1 0 2 4 6 8 10 12 14
Excess gain ratio
Distance (m)
Distance (m)
J EXCESS GAIN VS. SET DISTANCE
E3F2-DS10Zj-N
9 8 25 7 Sensing object (black paper: 5 x 5 cm)
E3F2-DS10j4-N E3F2-DS10j4-P1
30
E3F2-DS30j4 E3F2-DS30j4-P1
50 45 40
Excess gain ratio
Excess gain ratio
Excess gain ratio
6 5 4 3 2 1 0 0 20 40 Sensing object (white paper: 5 x 5 cm)
20 Sensing object (white paper: 5 x 5 cm)
35 30 25 20 15 10 5 Sensing object (black paper: 10 x 10 cm) Sensing object (white paper: 10 x 10 cm)
15
10 Sensing object (black paper: 5 x 5 cm)
5 0 0
60
80
100
120
0 20 40 60 80 100 120 0 10 20 30 40 50 60
Distance (mm)
Distance (mm)
Distance (cm)
7
E3F2
E3F2
Operation
J OUTPUT CIRCUITS
Configuration NPN pre-wired Model
E3F2-7C4 E3F2-7C4-M E3F2-7C4-C E3F2-7C4-S E3F2-R2C4 E3F2-R2RC4-M E3F2-R2RC4-C E3F2-R2RC4-S E3F2-DS10C4-N E3F2-DS10C4-M E3F2-DS10C4-C E3F2 DS10C4 C E3F2-DS10C4-S E3F2 DS10C4 S E3F2-DS30C4 E3F2-DS30C4-M E3F2-DS30C4-S
Connection method Connect the pink and brown wires or open the pink wire.
Output transistor ON when light is incident. (Light-ON)
Output circuit
Light indicator Pink (2) Red Main circuit ZD Blue (3) ZD:VZ = 36 V Brown (1) (see note) (Mode selection) Black (4) Load 10 to 30 VDC
100 mA max. (control output)
Connect the pink and blue wires.
ON when light is interrupted. (Dark-ON)
Brown (1) (see note) Light indicator Pink (2) Red Main circuit ZD Blue (3) (Mode selection) Black (4) Load 10 to 30 VDC
100 mA max. (control output)
ZD:VZ = 36 V
PNP pre-wired
E3F2-7B4 E3F2-7B4-M E3F2-7B4-C E3F2-7B4-S E3F2-R2B4 E3F2-R2RB4-M E3F2-R2RB4-C E3F2-R2RB4-S E3F2-DS10B4-N E3F2-DS10B4-M E3F2-DS10B4-C E3F2-DS10B4-S E3F2-DS30B4 E3F2-DS30B4-M E3F2-DS30B4-S
Connect the pink and brown wires or open the pink wire.
ON when light is incident. (Light-ON)
Light indicator Pink (2) ZD Red Main circuit
Brown (1) (see note) (Mode selection) Black (4) 100 mA max. (control Load output) (3) ZD:VZ = 36 V
10 to 30 VDC
Blue
Connect the pink and blue wires.
ON when light is interrupted. (Dark-ON)
Light indicator Pink ZD Red Main circuit Black
Brown (1) (see note) (2) (Mode selection) (4) 100 mA max. (control output) Load (3) ZD:VZ = 36 V
10 to 30 VDC
Blue
NPN connector
E3F2-7C4-P1 E3F2-7C4-M1-M E3F2-7C4-M1-C E3F2-7C4-M1-S E3F2-R2C4-P1 E3F2-R2RC4-M1 -M E3F2-R2RC4-M1 -C E3F2-R2RC4-M1 -S E3F2-DS10C4P1 E3F2-DS10C4M1-M E3F2-DS10C4M1-C E3F2-DS10C4M1-S E3F2-DS30C4P1 E3F2-DS30C4M1-M E3F2-DS30C4M1-S
Connect the pink and brown wires or open the pink wire.
ON when light is incident. (Light-ON)
Light indicator Pink (2) Red Main circuit ZD
Brown (1) (see note) (Mode selection) Black (4) Blue (3) ZD:VZ = 36 V Load 10 to 30 VDC
100 mA max. (control output)
Connect the pink and blue wires.
ON when light is interrupted. (Dark-ON)
Brown (1) (see note) Light indicator Pink (2) Red Main circuit ZD Blue (3) (Mode selection) Black (4) Load 10 to 30 VDC
100 mA max. (control output)
ZD:VZ = 36 V
Note: Terminal numbers are for connector types.
(This table continues on the next page.)
8
E3F2
Operation Table - continued from previous page
Configuration PNP connector Model
E3F2-7B4-P1 E3F2-7B4-M1-M E3F2-7B4-M1-C E3F2-7B4-M1-S E3F2-R2B4-P1 E3F2-R2RB4-M1 -M E3F2-R2RB4-M1 -C E3F2-R2RB4-M1 -S E3F2-DS10B4P1 E3F2-DS10B4M1-M E3F2-DS10B4M1-C E3F2-DS10B4M1-S E3F2-DS30B4P1 E3F2-DS30B4M1-M E3F2-DS30B4M1-S E3F2-3Z1 E3F2-R2Z1 E3F2-DS10Z1-N
E3F2
Connection method Connect the pink and brown wires or open the pink wire.
Output transistor ON when light is incident. (Light-ON)
Output circuit
Light indicator Brown (1) (See Note.) Pink (2) ZD Red Main circuit (Mode selection) Black (4)
Blue
100 mA max. (control Load output) (3) ZD:VZ = 36 V
10 to 30 VDC
Connect the pink and blue wires.
ON when light is interrupted. (Dark-ON)
Light indicator Pink ZD Red Main circuit Black
Brown (1) (See Note.) (2) (Mode selection) (4) 100 mA max. (control output) Load Blue (3) ZD:VZ = 36 V
10 to 30 VDC
AC switching
--- (Fixed)
ON when light is incident. (Light-ON) ON when light is interrupted. (Dark-ON)
Brown Light indicator Load Red Main circuit
E3F2-3Z2 E3F2-R2Z2 E3F2-DS10Z2-N
Black
200 mA max. (control output)
24 to 240 VAC
Blue
Note: Terminal numbers are for connector types.
J TIMING CHART
Light-ON Mode
Incident Interrupted Light indicator (red) Control output Load (relay) ON OFF ON OFF Operate Release
Dark-ON Mode
Incident Interrupted Light indicator (red) Control output Load (relay) ON OFF ON OFF Operate Release
Terminals/Connections
Mode selector Vcc
2 3
1 4
0V
Output
9
E3F2
E3F2
Dimensions
Unit: mm (inch)
J PRE-LEADED DC MODELS
65 (2.56) 49.3 (1.94) 42.3 (1.67) 37 (1.46) Diffuse and Retroreflective (DC) Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 4-conductor (brown, blue, black, and pink) Standard length: 2 m Through-beam (DC) 16.8 dia. Emitter: Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 2-conductor (brown and blue) Standard length: 2 m Receiver: Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12), 4-conductor (brown, blue, black, and pink) Standard length: 2 m Sensitivity adjuster on DS 30 diffuse models only Light indicator 3.1 (0.12)
Receiver 6.2 (0.24)
24 (0.94)
5 dia.
E3F2-7j4-j E3F2-DS10j4-j E3F2-DS30j4 E3F2-R2j4 E3F2-R2Rj4-j
Emitter (or receiver on through-beam)
22 (0.87)
8 (0.31)
M18 x 1
J CONNECTOR DC MODELS
E3F2-7L-P1 E3F2-7D-P1 E3F2-7C4-P1, -M1-j E3F2-DS10j4-P1, -M1j E3F2-DS30j4-P1, -M1j E3F2-R2j-P1 E3F2-R2Rj-M1-j
12.4 (0.49) A 24 (0.94) 16.8 8.2 B 49.3 (1.94) 42.3 (1.67) 37 (1.46) 5 dia. 6 dia. 6.2 10.5 dia. 16.8 dia.
Lens
M12 x 1
Optical axis
22 (0.87)
4 M18 x 1 5 8
Sensitivity adjuster on DS 30 diffuse models only Light indicator
Nameplate
Metal body E3F2-DSjjjj-j1 A B 76 (2.99) 65.5 (2.58)
Plastic body E3F2-DS30j4-P1 73 (2.87) 61.7 (2.43)
10
E3F2
E3F2
J AC MODELS
E3F2-3Z1, E3F2-3Z2 E3F2-R2Z1, E3F2-R2Z2 E3F2-DS10Z1-N, E3F2-DS10Z2-N
Receiver 90 (3.54) 24 (0.95) 8 4 67.3 (2.65) 62 (2.44) M18 x 1 Through-beam (AC) Emitter: Polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 2-conductor (brown and blue) Standard length: 2 m Receiver: Polyvinyl chloride-covered cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) Standard length: 2 m Diffuse and Retroreflective (AC) Vinyl insulated round cord, 4-mm dia. (11/0.16), 3-conductor (brown, blue, and black) Standard length: 2 m
6.2 (0.24)
5
5 dia.
22 (0.87)
Emitter
Light indicator
16.8 dia. 3.1 (0.12)
J ACCESSORIES
E39-R1 Reflector (included with retroreflective units)
7.5 (0.30) 2.7 (0.11) 2-3.5 (0.14) dia. 34 (1.34) 7 (0.28)
E39-L7 Reflector Adapter (order separately)
39.3 (1.55) 34 (1.34) 12 (0.47)
Nut (M5) 52 59.9 (2.05) (2.36) 59 (2.32) M5 Spring washer (M5) 1.6 (0.06) 8 (0.31) 2-M3
52 (2.05)
E39-R3 Reflector (order separately)
Mounting Bracket for E39-R3 (included with E39-R3)
29 (1.14) 4.5 (0.18)
R20
11 (0.43) Adhesive side 20 (0.79) 0.2 (0.008) Two, M3 34 (1.34) 25.4 (1.00) 38 (1.50) 1.2 (0.05) 2.6 (0.10)
3.4 (0.14)
13.7 7 20 0.2 (0.79) 11 16 (0.63)
14
18.45 28 (1.10) 22.9 (0.90)
0.2 Two, 3.2 dia.
34.8 (1.37)
41.8 (1.65)
25.40.1
38 (1.50)
R25.4
34 (1.34) 3.4
19.3 (0.76)
Two, M3
10.1 1.2 (0.05) 1.2
10
11
E3F2
E3F2
E39-RSA Reflector
35 (1.38) 33 (1.30) 10 (0.39) 8 Four, R1 Adhesive Reflecting tape surface
E39-RSB Reflector
40 (1.57) 38 (1.50)
0.7 (0.03)
0.7 (0.03)
33 (1.30) 35 (1.38) Adhesive tape Four, R1 Reflecting surface
E39-RU1 Right Angle Adapter
4.0 (0.16)
10.6 (0.42)
30 TYP. 6x2 mm
16.0 (0.63) 15.7 (0.62) 18.5 (0.73) 3.3 (0.13) 3.0 (0.12)
8.9 (0.35)
23.9 (0.94) 20.5 (0.81)
45
6.1 (0.24)
9.2 (0.36)
28.7 (1.13)
14.1 (0.56)
5-40 SUS set screw 45x0.5 all around M18x1 internal threads 22.0 (0.87) 24.6 (0.97)
Mounting E39-RU1 Do not exceed a torque value of 20 kg S cm (2.0 N S m, 17.4 in S lbs) when tightening the adapter onto the sensor. Use a 1/16" (1.5 mm) hex key on the set screw to secure the adapter to the E3F2. Do not exceed a torque of 3.5 kg S cm (0.35 N S m, 3.0 in S lbs). When set properly, the set screw will still extend beyond the adapter wall. Make sure to loosen the set screw before removing the adapter from the sensor.
12
E3F2
E3F2
Y92E-B18 Mounting Bracket
320.2 (1.260.008) 17 (0.67) max. 47 (1.85) max. 7 (0.28)
Note:
30 (1.18) 18 (0.71) dia.
Hexagonal nut: M5 x 32 Material: plastic
E39-F31 Lens Cap
Glass plate 4 (0.16) max.
20 (0.79) dia. Metal rim Gasket E3F2
J OPTIONAL CONNECTOR CABLES
Straight Connector Cable
Y96E-44SDj
Right Angle Connector Cable
Y96E-44RDj
14.67 (0.58) 26.65 (1.05)
14.67 (0.58)
34.92 (1.37)
Aluminum coupling nut Silver-plated copper contacts Silver-plated copper contacts Aluminum coupling nut
22 AWG, PVC jacketed cable rated for 300 V, 90C: 2 m (6.56 ft) length for Y96E-44SD2 5 m (16.40 ft) length for Y96E-44SD5 10 m (32.81 ft) length for Y96E-44SD10
22 AWG, PVC jacketed cable rated for 300 V, 90C: 2 m (6.56 ft) length for Y96E-44RD2 5 m (16.40 ft) length for Y96E-44RD5 10 m (32.81 ft) length for Y96E-44RD10
Note: Cable may be extended to a maximum of 200 m (656 ft.)
Terminals/Connections
Pin configuration NPN
10-30 VDC 4 1 2 3 max. 100 mA to to 1 3
Assembly Directions
Insert the M12 threaded end of the sensor into socket of connector so that the notch correctly aligns the pins. Tighten the coupling nut by hand, not using a tool, until all the threads on the rear of the sensor are covered. This assures a positive connection, important for installations with vibration.
Connector Cable
Brown Pin 1 )VDC Black Pin 4 Output Blue Pin 3 0V Pink (White) Pin 2 Mode Selection
0 Light-ON Dark-ON
Viewed from pinside of connector
Pin configuration PNP
max. 100 mA 4 1 2 3 to to 1 3 0 Viewed from Light-ON pinside of connector Dark-ON 10-30 VDC
Note: Water tightness with connector is only valid when authorized connections are used. Cordset wire colors are shown in parentheses.
13
E3F2
E3F2
Precautions
If the input/output lines of the Photoelectric Sensor are placed in the same conduit or duct as power lines or high-voltage lines, the Photoelectric Sensor could be induced to malfunction, or even be damaged, by electrical noise. Separate the wiring, or use shielded lines as input/output lines to the Photoelectric Sensor. Do not subject the Photoelectric Sensor to excessive shock when mounting, in keeping with IEC60529 IP66 standards. Do not connect the black wire to the brown wire without a load. Direct connection of these wires may damage the Photoelectric Sensor (AC switching type).
Brown
When using the Photoelectric Sensor at temperatures over 45C, the load current must be within the rated value shown in the figure below.
200
Load current (mA)
130
Load Sensor Black 24 to 240 VAC
0 45 55
Operating temperature (C)
J MOUNTING
Blue
Do not exceed a torque of
! WARNING
The E3F2 Photoelectric Sensor is not a safety component for ensuring the safety of people which is defined in EC Directive (91/368/EEC) and covered by separate European standards or by any other regulations or standards. When using the Photoelectric Sensor in the vicinity of an inverter motor, be sure to connect the ground wire of the motor to earth. Failure to ground the motor may result in malfunction of the Sensor.
* *
2.0 N S m {20 kgf S cm} 17.7 in S lb when tightening mounting nuts for plastic models. 20.0 N S m {200 kgf S cm} 177 in S lb when tightening mounting nuts for metal models.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ELECTRONICS, INC.
One East Commerce Drive Schaumburg, IL 60173
OMRON CANADA, INC.
885 Milner Avenue Scarborough, Ontario M1B 5V8
1-800-55-OMRON
Cat. No. CEDSAX3 10/99 Specifications subject to change without notice.
416-286-6465
Printed in U.S.A.

▲Up To Search▲

Price & Availability of E3F2-R2Z1

	To Download E3F2-R2Z1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .